AccuQuilt Go! baby 55600UG Instruções e conselhos de utilização - Página 4
Procurar online ou descarregar pdf Instruções e conselhos de utilização para Cortador AccuQuilt Go! baby 55600UG. AccuQuilt Go! baby 55600UG 8 páginas.
Imprimir páginaFollow these steps to get perfect cuts every time
1. GO WIth thE GRAIn – For most accurate cuts, be sure you're cutting on
the lengthwise grain (straight of grain) as the fabric goes under the cutter.
- The lengthwise grain runs parallel to the selvage edge—the bound edges of
fabric that prevents unraveling or fraying—so place your fabric on the die with
the selvage edge facing you (or the cutter handle) before running it through
the cutter.
- Cutting on the lengthwise grain is particularly important when cutting
geometric shapes and Block on Board
2. PRE-CUt FABRIC stRIPs – To use the AccuQuilt GO! Baby cutter, fi rst pre-cut
strips of fabric approximately ½" wider than the shape you want to cut.
- These strips can be layered or fan-folded to cut multiple shapes in one pass.
tIPs: Orient the lengthwise grain to the length of the cutter.
Line fabric up just over the edge of the die blade, not the edge
of the die board, to conserve fabric.
4
need a LittLe insPiratiOn? GO! to accuquilt.com/spotlight for inspiration and a community of quilters just like you.
dies (aka BOB
or classic dies).
™
™