ARC Appliances SYP-6002 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Campânula de ventilação ARC Appliances SYP-6002. ARC Appliances SYP-6002 5 páginas. Cooker hood syp-6002
Imprimir página4.6 Put the one way valve onto the cooker hood.
Way two:
4.1 Drill 6 holes of 4mm diameter at the bottom of the hanging cupboard
4.2 Put the one way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 6 screws.
4.3 Install the adjusted board on the bottom of the hood in order to keep out the gap between hood
back and cupboard.
¥ ¢
¡
¢ £ ¤
5. ATTENTION: should the lamps not work, make sure they are well tightened
6. OPERATION
6.1 Connect the plug into the power.
6.2 Push the switch F into "I", the lamp be on; push into "0", the lamp be off.
6.3 Push the switch G into "I II III", the motor will be on "low mid high" three
speeds, push into "0", the motor will be off.
7. USE AND MAINTENANCE
It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for 15 minutes after cooking is terminated in
order to completely eliminate cooking vapours and odours.
If the appliance is not used, please turn off.
Don't use or stop use if the appliance is damaged especially the supply cord and the case.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Don't immerse the appliance in liquid.
The exhaust air must not be discharge into a flue which is used for exhausting fumes from
appliance burning gas or other fuels.
Regulations concerning the discharge of air have to be fulfilled.
The proper function of the cooker hood is conditioned by the regularity of the maintenance
operations, in particular, the active carbon filter.
The anti-grease filters capture the grease particles suspended in the air, and are therefore subject to
- 3 -