ARC Audio MOTO 720 Manual do Proprietário - Página 2
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador ARC Audio MOTO 720. ARC Audio MOTO 720 13 páginas. 4 channel motocycle and off-road amplifier
Imprimir página
Thank you for purchasing this ARC Audio Hi-Performance Ampli er.
This ARC Audio ampli er uses a Full Range Class D architecture that signi cantly improves e ciently, lowers heat
production and current draw. Don't be fooled by the small size. Class D ampli ers make more power for their size then
traditional designs making installation a breeze without compromising storage space.
Warning
We build all ARC Audio products to play at high volumes for extended periods of time. Your ears however are not
designed for high volume listening. This product can easily generate volumes that can permanently damage your
hearing. We urge you to limit your exposure to very high volume sound.
You may also nd your state has laws governing the volume of an audio system. Please be aware of all local and state
laws in you area.
A properly tuned and operated audio system will deliver years of enjoyment when used properly.
Installation Instructions
ARC Audio Ampli ers are designed for easy installation in your motorcycle, car or UTV. To ensure proper operation of your
new purchase, please follow the suggestions we have listed below:
Warning
Please check the suitability of the installation location before you begin. Do not cut any of the structure. Pay close attention to
what is behind the panels. Often the manufacture will hide wires, computers or other electronic devices in the exact areas you
wish to install in.
If you do not have experience with motorcyc or automotive electrical and mechanical systems contact a professional installer.
Paying a quali ed installer is almost always cheaper then paying a dealership for an avoidable repair.
Locating the Ampli er
The ampli ers must be securely mounted to a solid surface. Please select a dry location only. Do not mount the ampli er to
any area that may have excessive vibration, and position the ampli er in an area that receives su cient air ow for proper heat
dissipation.
This ampli er is not fully waterproof. Please nd a dry and protected location to mount it
Supplying Enough Power
The Laws of Nature
Your ampli er Does NOT make power. It converts power, or current, from your electrical system and turns it into a high
power musical energy. If the amp can't get all the power it needs it will not produce its full output. Your ARC Audio ampli-
er will produce Full output for longer then other amps on the market today. If the Voltage or Current drops too low even
our ampli ers will drop below their rated output. Make sure your vehicle charging system is in good working order. Any
Hi-Performance audio ampli er will increase the demand on your alternator and battery. If you are unsure have your
charging system tested by a professional technician.
The Ground!!!
A quality ground is necessary for the ampli er to function propery. In some applications, you may be able to ground directly to
the chassis. In others, like a motorcycle or side by side, the ground wire should connect directly to the battery. It is important
to note, you should never use seat belt bolts for grounding.
Remember, the ground must carry the same high current as the positive power wire.
To reduce the risk of noise, run all signal cables away from any vehicle or power supply wiring.
1
TOP