Cino CN-KA Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Máquina de café Cino CN-KA. Cino CN-KA 6 páginas.

Imprimir página

1. Lift the handle and pull out the capsule holder.

2. Put in the capsule, fit into capsule holder in the right position and press down the handle.

3. Place the cup.

4. (CN-KA Press the volume button, volume button's indicator will blink at 1 time/s, other

indicators will be constantly ON. ）

(CN-KB Select the temperature and volume by switch.）

5. After the pump has stopped working for 2 seconds, you shall hear a "beep", meaning the

brewing process has completed.

6. Pull out the capsule holder to dispose of the used capsule, then fit into capsule holder in

the right position.

The machine utilizes only specific capsule.

Please consult a specialized distributor before use.

Immediately dispose of the used capsule each time after use.

Press power button if you want to stop it during work.

Do not open the handle when brewing is being done.

Opening the handle during brewing may terminate the machine.

Functionality

1.Volume setting

KA: 1. Lift the handle and pull out the capsule holder.

2. Put in the capsule, fit into capsule holder in the right position and press down the handle.

3. Press and hold the big/small cup volume button until the volume meet your requirement

(One of volume button's indicator blink at 1 time every 2s)

KB: Switch the volume knob clockwise, volume indicators will turn on one by one.

Switch the volume knob anticlockwise, volume indicators will turn off one by one.

2. Return to Factory Setting

KA: Press large cup volume button and power button together for 3s in the standby mode,

KB: Turn off and on the power, the machine returns to factory setting.

3. Power save mode

KA: a. If machine hasn't been operated for 10 minutes in the sandby mode the machine

KB: If machine hasn't been operated for 10 minutes in the standby mode the machine

4. Temperature selection

KB: Switch the temperature knob clockwise to increase the temperature.

5.Clear the System

KA: Press big cup button and small cup button together for 3s in the standby mode, then you will

6.Descaling

KA: Press and hold both the medium and small cup buttons for 3 seconds in the standby mode,

Warning

KA: When the handle isn't closed in the right position, the machine signals a warning: the small cup

KB: If Handle isn't closed in the right position, the machine will send out a warning: all volume

then you will hear a "beep". The machine will be restored to factory setting and return

back into standby mode.(volume button indicators blink 3 times at 1 time/s together)

will go to power saving mode automatically.

b. Press power button in any mode, after you hear a beep", the machine will go to

power saving mode.

c. In order to use the machine in power saving mode, you need to press the power

button again. Then the machine goes back to standby mode.

will go to power saving mode automatically. Now brewing indicators will always be

on, volume indicators will light 1s and pause 2s alternatively.

Switch the temperature knob anticlockwise to decrease the temperature.

hear a beep, both big and small volume buttons blink at 2 times/s together, the machine goes

to "Clear the System" mode. After emptying the machine both the boiler and the pump stop

working (after you hear a "beep", both the big and small volume buttons blink at 2 times/s

alternatively, now Clear the System is completed).Then press power button or plug out the

power cable to exit Clear the System mode.

when after a "beep", the machine goes to Descaling, both the boiler and pump work at the

same time until the water in the water tank is pumped dry. ( After a long "beep", both the

medium and small cup button blink 2 time/s together, Descaling is finished ). Nowpress

power button or plug out the power line to exit Descaling.

Handle not closed

indicator blinks at 2 times/s continuously. Closing the handle can disengage the warning.

indicators blink at 4Hz.