AccuraSEE MINI Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Ventilador AccuraSEE MINI. AccuraSEE MINI 5 páginas. Portable heat recovery ventilator

Imprimir página

Introduction

T
he User Manual concisely presents the information that is needed to correctly
install and operate the product. Failure to strictly follow the instructions in the
User Manual nullifies the Terms and Agreements of the manufacturer.

Product Description

I C O N
K E Y
The product is a portable heat recovery ventilator which is housed in an attractive

Warning

polymer enclosure. The heat recovery ventilator performs three functions. First, it
supplies fresh air to a space (ventilation). Secondly, the fresh air that is supplied to the
Note
space is purified with filters while pollutants such as germs, molds, excess moisture,
†
Caveat
CO
, radon, odors, and particulates are expelled from the space (purification). Thirdly,
2
the supplied fresh air is passively heated or cooled depending on the outdoor
conditions (comfort). The product is visually depicted in Figure 1.
Supply vent
(supplies fresh & purified air)
Figure 1. The (a) external side and (b) internal top views of the portable heat recovery ventilator.
The approximate external dimensions of the enclosure of the product are ~15.7 in × ~11.8 in × ~6.3 in
(~39.9 cm × 29.9 cm × ~16.0 cm). The actual product that is received by the customer may slightly differ from the images in Figure 1.
Some products may carry only one or no fan controller. Note. Figure 1 is not drawn to scale.
Exhaust vent
(removes stale & polluted air)
(a) External side view.
(b) Internal top view.
1
Warning
Please, observe these warnings:
Failure to comply with the warnings may result in fire, property
damage, electric shock, injury, or death.
To prevent suffocation, electric shock, injury or death, the customer
is responsible to ensure that children shall NOT access the product.
The product shall not be modified, disassembled, or serviced.
The product shall be shut down if the outdoor air temperature
exceeds 35ºC or 95ºF.
The supply and exhaust vents shall NOT be blocked.
The product comes with pre-installed supply and exhaust ducts and
their orifices shall NOT be blocked.
The enclosure shall not be opened when the product is powered.
The product operates using 12V DC and shall NOT be directly
connected to the wall power or mains electricity. It is strongly
recommended to use an AC-to-DC power adapter that is rated for
12V DC power supply and can handle at least 3A.
As soon as possible, the power adapter cord shall be safely disconnected
from the wall power if liquid spills on or around the product.
The power adapter shall only be connected to an electrical receptacle that
is permanently installed in a space.
The electrical parts of the product (i.e., power switch, power connector,
fan controller(s) – if applicable, and fans) shall not be handled.
NOTE 
The product operates in
The cables in the product shall not be disconnected, changed, or modified.
Normal (default) and
Boost modes. The
Boost mode is only
To maintain the calibration of the product, the potentiometer of the fan
intended for periods
controller shall not be adjusted.
where additional
ventilation is needed
and should not be used
to permanently operate
the product.
2