Axor Massaud 18213001 Manual de instruções de instalação - Página 8
Procurar online ou descarregar pdf Manual de instruções de instalação para Mobiliário de interior Axor Massaud 18213001. Axor Massaud 18213001 12 páginas. Lavatory/ bidet faucet
Imprimir páginaInstall the pop-up drain
Remove the plunger assembly.
Unscrew the drain outlet flange from the tee.
plunger
Unscrew the tailpiece from the tee. Wrap the
height adjuster
threads with plumbers' thread tape and replace.
Install the white, flexible sealing gasket to the
flange
flange. Place it in the sink outlet.
From under the sink, install the black mack gas-
ket, white friction ring and retainer nut to the
flange. Do not tighten the nut against the bottom
sealing gasket
of the sink at this time.
Thread the tee and tailpiece to the flange. The
mack gasket
pivot must face the faucet. If necessary, turn the
drain assembly.
friction ring
vertical rod
Tighten the retainer nut.
Place the plunger assembly in the drain.
retainer nut
Install the horizontal rod so that the end goes
through the loop in the bottom of the height
tee
adjuster.
pivot ball nut
Install and hand tighten the pivot ball nut.
Attach the swivel connector to the end of the
horizontal rod.
Attach the swivel connector to the end of the
horizontal rod
vertical rod. Position as desired and tighten
with a small, flathead screwdriver.
tailpiece
swivel connector
8