Cipax CPX 23020 Instalação e utilizador - Página 15

Procurar online ou descarregar pdf Instalação e utilizador para Aquecedor de água Cipax CPX 23020. Cipax CPX 23020 18 páginas. Closed tank 3000l
Também para Cipax CPX 23020: Manual de instalação (10 páginas)

Imprimir página
3.
Insert the provided screws and
gently tighten them alternately
until the extension neck appears to
be tightly against
Mounting of 600 mm pipe
1.
Measure the distance from the step in
the tank, shown in the picture, to the
ground level. Add some distance for
ground clearance so the lid will be well
above the ground.
A. In the upper part cut the
2.
pipe just below the
centerline at the bigger
diameter.
B. In the lower part cut the
pipe just above the
centerline at the smaller
diameter. Deburr the
cutting edges!
C. The lip on the rubber
sealing must point
upwards! See picture. Use
freely of lubricant before
pressing the pipe into the
tank!
the tank.
15