Arca-Swiss Monoball Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Acessórios para câmaras Arca-Swiss Monoball. Arca-Swiss Monoball 4 páginas.

THIS PROBLEM: INCREASE TENSION ON BALL BY ROTATING

MULTIFUNCTION KNOB CLOCKWISE. RELEASE FRICTION BY

TURNING THUMBSCREW COUNTER CLOCKWISE, NOW RELEASE

TENSION ON THE BALL BY ROTATING THE MULTIFUNCTION

KNOB COUNTER CLOCKWISE. ALSO SEE TROUBLE SOLVING

APPENDIX.

Adjusting the amount of friction

A signature element of the ARCA-SWISS Monoball® design is the ability

to adjust the degree of friction on the ball giving you more precise

control of the movements of the camera or to compensate for various

cameras and lens combinations. The patented aspheric design of the

ball increases drag on the ball to progressively slow inadvertent tilts to

prevent or minimise possible damage to your camera or lens.

With the head tightened, mount the lightest combination of camera and

lens you will regularly use. Turn the small thumbscrew (located on the

multifunction knob) by rotating it counter clockwise till it stops. Now

turn the multifunction knob counter clockwise until you reach the

desired minimum degree of friction. This can range from completely

free or to as little or as much drag as you desire. Turn the thumb

screw clockwise until it stops. You have now set your minimal friction

limit for this camera and lens combination. The multifunction knob will

now not turn beyond this minimal friction limit. If in the future you

wish mount a heavier combination you will need to increase the tension

on the ball (by turning the multifunction knob clockwise according to

the weight of the camera and lens combination and re-adjust the

minimum desired friction "set" by turning the friction thumbscrew

clockwise.

IMPORTANT: To lower your minimal friction limit turn the

multifunction knob clockwise and then turn the friction screw

counter clockwise until the multifunction knob and ball move freely

enough for you to adjust your new minimal friction limit.

Never force the multifunction knob to turn beyond the set minimal

friction point. Attempting to do so will cause the multifunction knob to

lock up. (See the "Attention!" Note.)

The Reference Scale

If you use more than one combination of camera and lens you may wish

to use the rotating reference scale as a reminder of your settings.