Arcade Guns G-500 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Controlador de videojogos Arcade Guns G-500. Arcade Guns G-500 20 páginas.

PlayStation 2 Console Games Setup

Your Arcade Guns™ light guns can be used to play Guncon 2 games on your

PlayStation 2 console (Guncon 1 & 3 games are not supported).

Here is a quick setup guide to get your started:

Hold the two buttons (large and small) on the gun(s) while powering on the PlayStation

console and continue to hold these buttons until the calibration screen appears. The

gun should be recognized by the PlayStation console once you see this screen. Now

hold the large button on the back of the gun for 5-10 seconds to calibrate each gun.

After the gun(s) are calibrated you are ready to play!

The LED light bar will also need to be connected to a USB port for power. You can use

the second USB port on the PlayStation or a powered USB hub.

Button configuration for PlayStation:

Trigger:

Small Button:

Large Button (on-screen):

Large Button (off-screen):

Small & Large Buttons pressed together:

Note: These buttons cannot be changed

1) Boot into the game. The game will display a calibration screen.

2) At this point you should calibrate the gun(s).

3) Aim the gun in the center and hold the large button for 10 seconds. If this doesn't

work, try holding the trigger for 5-10 seconds.

4) Cursor will move to the upper left corner of the screen. Aim at this point and pull

the trigger.

5) Do the same for the upper right and lower center. Pulling the trigger after each.

6) Press a button to proceed into the game.

Arcade Guns™ User Manual

Guncon Trigger

Guncon Button A

Guncon Button B

Guncon Select

Guncon Start