AXTON ATC130 Manual de instalação e operação - Página 5

Procurar online ou descarregar pdf Manual de instalação e operação para Sistema estéreo para automóvel AXTON ATC130. AXTON ATC130 10 páginas. Component systems

Imprimir página

1. Vor der Installation

Thank you and congratulations on your purchase of this AXTON 2-way component sys-

tem. This loudspeaker system uses very high quality parts and components only. As with

all high-quality car audio components, professional installation is highly recommended. If

you plan on installing this component system by yourself, please read the following instal-

lation guide carefully, before you attempt the installation. You should retain this manual, the

packing and the purchasing receipt for future reference. For any further information about

mounting, connecting or adjusting this speaker system, please contact your authorized

AXTON dealer.

UNPACKING THE SYSTEM

Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and

check whether all parts are in good undamaged condition, and match with the set con-

tents listed below:

2 mid/woofers

2 tweeters

2 crossovers

2 grilles for mid/woofers

1 set of mid/woofer mounting hardware

2 pcs tweeter flat surface mounting adapter

2 pcs tweeter angled mounting adapter

1 instruction manual with warranty card

Please contact your authorized AXTON dealer if the content of this set is incomplete or

parts of it show signs of transport damage.

BEFORE YOU START

The first step is to choose the most suitable or best sounding location for the speakers to

be installed. Keep in mind that the best looking spot might not be the one that gives you

best sound. The factory OEM speaker cutouts usually provide space and a stable platform

for fast and convenient mounting of new mid/woofer units. To use the OEM speaker cut-

outs is highly advantageous in most cases and it will also prevent you from having to cut

new holes. For the tweeter mounting, some extra care to find the best spots will usually

pay in form of improved front staging and better resolution.

– 8 –

MOUNTING THE MID/WOOFERS

Remove the factory grilles of the door - or if necessary - the complete door panels. The

AXTON speaker EURO-DIN frame mid/woofer units provide bolt and screw holes to fit

a great variety of OEM standard patterns, making them ideal for a direct replacement of

factory installed speakers in European or Asian cars.

Before you attempt to install the new AXTON mid/woofers, you must check the availa-

ble installation depth of the left and right front door. To do this, slide down both windows

and hold the AXTON mid/woofers in place to reassure the available installation depth

does suffice. This test is important; failure to do this may let you end up with an impaired

window function!

Connect the corresponding speaker wires to the terminals of the mid/woofer units.

Maintain polarities all the way – double check for correct connection. It is very important

to make sure that all the connections are electrically in phase, which means positive wire

(+ or red) is connected to positive terminal, and negative wire (- or black) is connected to

the negative terminal. Reverse polarity connections of mid/woofers will cause a very low

bass output and a messed up front staging.

The cone and surround material of the mid/woofers is 100% water proof. However, a

direct exposure of the mid/woofer to water inside the doors should be avoided. In most

cases, protection foils or baffles like ZEALUM ZN-SPB165 can be installed to protect the

speaker.

Check that there are no gaps between the speakers and the mounting surface in the

doors. Note that some (newer) cars will require the use of car-specific mounting adapters

made of plastic material. Without them, the Euro-DIN mid/woofers will not fit to the OEM

cutout, or the available installation depth will not be sufficient. Such adapters are usually

available from your authorized AXTON dealer.

Fix the mid/woofer to the speaker mounting hole using the provided screws. If the mid/

woofers are directly fixed onto the metal sheet of the door, use the metal clips included

with the mounting hardware. You can now reinstall the factory plastic grilles or doors

panels. In case you have chosen a new location for your mid/woofers (other than factory

cut-out), use the speaker protection grilles.

– 9 –