Arcam SOLO MINI Manual - Página 17
Procurar online ou descarregar pdf Manual para Conversor de multimédia Arcam SOLO MINI. Arcam SOLO MINI 18 páginas. Music system
Também para Arcam SOLO MINI: Brochura (2 páginas), Manual (20 páginas)
Imprimir página
technical
specification
Pre-amplifier
Inputs
Maximum input level
2.5Vrms
Input impedance
47k
Ω
Signal/noise ratio
105dB
Co-axial outputs
Maximum output level
2.5Vrms
Output impedance
500
Ω
Amplifier
Continuous power output, per channel, 80kHz measurement bandwidth
Both channels, 8
Ω
, 1kHz
25Wrms, 0.1% THD+n
Distortion, both channels 8
, 80%
0.036% THD+n
Ω
power, 1kHz
CD playback
DAC
Wolfson 24-bit multilevel Delta-Sigma
DAC
Frequency response (±0.5dB)
20Hz–20kHz
DAB receiver (where fitted)
RF tuning range
174–240MHz (Band III)
1452–1490MHz (L-band)
Number of DAB presets
10
Sensitivity (typical)
–98dBm (VHF measurement to EN50248)
Input impedance
50
Ω
Audio data rate (maximum)
256kbits/s MPEG layer II, protection level
3
FM receiver
RF tuning range
87.5–108MHz (Europe and USA)
77.5–108MHz (Japan)
Number of FM presets
30
Sensitivity (typical)
2µV
Signal/noise ratio (at 200mV)
58dB
Distortion (THD at 200mV)
0.5%
AM receiver
RF tuning range
Number of AM presets
Signal/noise ratio (at 200mV)
Distortion (THD at 30%
modulation)
General
Supply voltage*
Power consumption
Size (W x D x H)
Weight (net)
Weight (packed)
Supplied accessories
* In Japan, the supply voltage is 100V, 50–60Hz.
E&OE. All specification values are typical unless otherwise stated.
17
522–1710kHz, in steps of 9kHz (UK)
530–1710kHz, in steps of 10kHz (USA)
531–1629kHz, in steps of 9kHz (Japan)
30
40dB
1.5%
100V, 115V or 230V AC,
depending on shipping region
Standby mode 1W
Operational 80W (typical), 250W
(maximum)
W230mm x D350mm x H90mm
5.31kg
6.7kg
Mains lead
Solo remote control handset and two AAA
batteries
Instruction manual and registration card
DAB/FM model: DAB Telescopic aerial, FM
dipole aerial and AM loop aerial,
AM/FM model: FM dipole aerial and AM loop
aerial