Digicom Archimede SMS Manual operacional - Página 9
Procurar online ou descarregar pdf Manual operacional para Sistema de segurança Digicom Archimede SMS. Digicom Archimede SMS 18 páginas. Remote alarm system
Imprimir página
3.Software Configuration
The programming of the Archimedes is carried out by sending SMS messages from a
normal cellular phone to the number of the SIM inserted in the unit. In this way the
Archimedes SMS stores the telephone numbers of the cellular phones to be informed in
the event of an alarm as well as the message to be sent for each alarm.
The programming will only be accepted by the unit if the dip switch is in the config position.
It is not advisable to use the SIM one uses every day as all the telephone numbers and
config can be overwritten easily. Each Archimede should have its own SIM and telephone
number.
3.1 Configuration Messages
The first thing to do is to label the Archimede and give it a name or identification number.
This identification will be sent by the Archimede whenever is sends alarm messages in
order that the receiver can identify the origin.
To configure the Archimede with its identification it must be sent the following SMS
message to the telephone number on its SIM.
# 0 #
Field
#
0
#
Identification
#
For example the message #0#My House# would designate the unit to be in My House and
any messages sent from it would contain this information.
After sending this message the receiving Archimedes Pwr LED will flash for 5 secs to
indicate the message has been received and stored.
3.1.2 Configuration of the 8 Inputs
In order to configure the inputs of the Archimedes SMS it is necessary to assign:
• The name of the alarm
• Change of state to signal* or on a transition *
• To where the message should be sent
*As explained below the message will be sent on the change of state ie open to closed or
alternatively closed to open or just when transition occurs ei from closed to shut or vice
versa
The Archimede can be configured to send a message Alarm On when the alarm contact is
closed and send Alarm Off when the alarm contact is open again, or send a message
Alarm On only.
Identification Name
Quantiy Characters
1
1
1
Max 20
1
#
Description
Delimit Character
Memory Location in Archimede
Delimit Character
Unit Name or Number
Delimit Character
9