Epson 1640XL - Expression Graphic Arts Manual - Página 14

If your PC has a SCSI board up and running, connect the scanner as described in the

next section.

Note:

You will need to install the SCSI driver that is normally included with Windows 2000,

98, 95, or NT (see your system documentation for instructions), or the driver described

in the SCSI board installation documentation.

For Macintosh users:

Your Macintosh may or may not have SCSI ports, depending on which model you own.

If you have a Macintosh that does not have a SCSI port, you need to install a SCSI

board and driver. Follow the directions below to connect your scanner and computer.

Note:

The latest driver may be available for download from the Web site of the SCSI board

manufacturer.

Setting the SCSI ID number

scanner's default SCSI ID number is 2.

The SCSI ID rotary switch is

located at the back of the

If you add the scanner to a system in which one of your SCSI devices already has a

SCSI ID of 2, change the ID number to an unused number using the rotary switch. See

the table below as a guide.

Availability

Not available for Macintosh

Not recommended for Win-

dows

Not recommended

scanner.

Description

Used for hard disk

Usually used for hard disk

Factory setting of the scanner

Connecting the Scanner to Your Computer