Axxess RFASWC Manual de instruções de instalação - Página 7
Procurar online ou descarregar pdf Manual de instruções de instalação para Eletrónica para automóveis Axxess RFASWC. Axxess RFASWC 12 páginas. Wireless swc universal add-on
Também para Axxess RFASWC: Manual de instruções de instalação (12 páginas)
Imprimir página
Changing Radio Type
Radio Legend
1. Eclipse (Type 1)
2. Kenwood
3. Clarion (Type 1)
4. Sony and Dual
5. JVC
6. Pioneer and Jensen
7. Alpine
* AX-SWC-PARROT is required (sold separately) and the radio must be updated to
rev. 2.1.4 or higher. Additionally, the RFASWC must be updated to the most recent
software available.
Note: If you have a Clarion radio and the RFASWC did not work try the other Clarion
radio type, same for the Eclipse
RFASWC
8. Visteon
9. Valor
10. Clarion (Type 2)
11. Metra OE
12. Eclipse (Type 2)
13. LG
14. Parrot*
15. XITE
Dual Assignment Instructions
Note: Seek Up and Seek Down are already set to Preset Up and Preset Down for a
long button press.
1) Turn on the ignition but do not start the vehicle.
2) Press and hold down the RFASWC button, that you want to assign a long press
function to, for about 10 seconds until the LED on the RFASWC interface rapidly
flashes. At this point release the button and the LED will go solid.
3) Press and release Volume Up the number of times corresponding to the new
button number selected. The LED will blink rapidly when Volume Up is pressed
and back to solid when released. Then go to the next step when Volume Up has
been pressed the desired number of times.
Caution: If more than 10 seconds elapses between a Volume Up press, this
procedure will abort, and the LED will go off.
4) To store the long press button in memory, press the button that you assigned a
long press button to (the button held down in Step 1). The LED will now go off
indicating it has been stored.
Tip: These steps must be repeated for each button you would like to assign
dual purpose action to.
To reset a button back to its original use, repeat Step 1 and then press Volume
Down. The LED will go off and the long press mapping for the button will be erased.
7