Epson 570e - LQ B/W Dot-matrix Printer Manual de informações do produto - Página 6
Procurar online ou descarregar pdf Manual de informações do produto para Impressora Epson 570e - LQ B/W Dot-matrix Printer. Epson 570e - LQ B/W Dot-matrix Printer 18 páginas. Warranty statement
Também para Epson 570e - LQ B/W Dot-matrix Printer: Manual de referência rápida (15 páginas), Especificações (2 páginas), Garantia limitada (1 páginas)
Imprimir página
EPSON LQ-570e
Safety standards
EN 60950
EMI
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
Acoustic noise
Approx. 49 dB (A) (ISO 7779 pattern)
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
Selects the font.
Indicate which font is selected.
Turns condensed mode on and off.
On when condensed mode is on.
Advances continuous paper to the tear-off position.
Feeds continuous paper backward from the tear-off position
to the top-of-form position.
Selects a cut-sheet feeder bin when the cut-sheet feeder
is installed and the release lever is in the single sheet
position.
Turns on the card mode to print on postcards and
envelopes.
6 - EPSON LQ-570e
EN 60950
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 60801-2
IEC 60801-3
IEC 60801-4
4/00
f f when continuous paper is in the tear-off position.
o n when bin 1 of the optional cut-sheet feeder is selected.
n o when bin 2 of the optional cut-sheet feeder is selected.
n n when the printer is in the card mode.
n = on, o = off, f = flashing
Feeds paper line by line when pressed quickly.
Ejects a single sheet or advances continuous paper to the
next top-of-form position when held down.
Loads a single sheet of paper.
Ejects a single sheet of paper when a sheet is loaded.
Loads continuous paper from the standby position.
Feeds continuous paper backward to the standby position in
micro adjust mode.
When you hold down the
printer enters the micro adjust mode. In this mode, you can
D and
press the
top-of-form or tear-off position.
Stops printing temporarily, and resumes printing when pressed
again. When pressed for 3 seconds, turns on micro adjust mode.
On when the printer is paused.
Flashes when the printer is in the micro adjust mode or
when the print head has overheated.
On when no paper is loaded in the selected paper source or
paper is not loaded correctly.
Flashes when paper has not been fully ejected or a paper jam
has occurred.
button for 3 seconds, the
U buttons to adjust the