Epson 900N Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Impressora Epson 900N. Epson 900N 13 páginas. Epson stylus color 900n: user guide
Também para Epson 900N: Ficha de informação do produto (4 páginas), Especificações (13 páginas)

Imprimir página

Removing and Installing Ink Cartridges

You can replace a cartridge when the B black or A color ink

out light is either flashing or on. (If you perform these steps

when both ink out lights are off, the printer cleans the print

heads as described on page 10.)

Follow these steps to replace ink cartridges:

1. Remove the new ink cartridge from its packaging.

2. Remove only the yellow part of the tape seal. Don't pull off

the blue portion or try to remove the clear seal underneath

the cartridge.

Remove the yellow tape

black cartridge

You must remove the yellow tape from the top of the

cartridge or you will permanently damage it. Don't

remove the clear seal from the bottom of the cartridge.

3. Make sure the printer is turned on and not printing, then

open the printer cover.

4. Press the R cleaning button and hold it for about three

seconds until the print head moves left and the P power

light begins flashing. The print head moves to the black or

color cartridge replacement position, depending on which

ink cartridge is empty.

To avoid damaging the printer, never move the print head

by hand. Don't open the clamp or remove a cartridge

except to replace it with a new one. Once you remove a

cartridge, you can't reuse it, even if it contains ink.

5. Pull up the ink cartridge clamp. The cartridge rises up from

its holder.

6. Lift the cartridge out of the printer and dispose of it

carefully.

If ink gets on your hands, wash them thoroughly with

soap and water. If ink gets into your eyes, flush them

immediately with water.

color cartridge

3/99

EPSON Stylus COLOR 900N

7. Lower the new ink cartridge into its holder with the label

facing up and toward the back of the printer.

8. Press down the ink cartridge clamp until it locks in place.

9. If you need to replace the other ink cartridge, repeat steps 4

through 8 before continuing with step 10.

10. Press the R cleaning button and close the printer cover.

The printer moves the print head and begins charging the

ink delivery system.

The P power light flashes, and the printer makes various

sounds. Charging takes about one minute. When it's

finished, the P power light stops flashing and stays on.

Never turn off the printer while the P power light is

flashing, unless the printer hasn't moved or made noise

for more than 5 minutes.

Replacing an Outdated Ink Cartridge

If an ink cartridge is more than six months old, you may need

to replace it. How can you tell? You may notice that your

printouts don't look as good as they used to. If print quality

doesn't improve after cleaning and aligning the print head,

you can replace one or both cartridges.

Follow these steps to replace an ink cartridge before the B black

or A color ink out light is flashing or on: