Circuit ECX03011AU Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Carro de brincar motorizado Circuit ECX03011AU. Circuit ECX03011AU 19 páginas. 1/10 4wd electric stadium truck

Imprimir página

SHOCK CLEANING

Oil-ﬁ lled shocks will require regular maintenance due to the oil breaking

down or getting dirty. This maintenance should be performed after about

every 3 to 5 hours of use, depending on the conditions that the vehicle is

used in.

• Remove the shock from the vehicle.

• Remove the cap from the shock body and dispose of fluid.

• Disassemble the shock. Clean thoroughly with DYN5505. Dry parts

before assembly.

• Re-assemble the shock and refill the shock body with silicone fluid (30

weight recommended).

• Slowly move the shaft and piston up and down to remove air bubbles.

• Move the piston to the midway point of the body and install the cap.

• Wipe off any overflowing fluid.

• When properly filled, the piston should rebound about 3/8 in (9.5mm)

after being pushed in fully.

• Re-install the shock on the vehicle.

Ride Height Adjustment

Ride height is an adjustment that affects the way the vehicle jumps,

turns and goes over bumps. Drop one end of the vehicle from approxi-

mately 6 inches (152 mm) in height onto

a ﬂ at surface. When dropping the front of the vehicle, after the vehicle

settles, make sure the front arms are equal and parallel to the ﬂ at

surface. Do the same with the rear to make sure both arms are parallel

with the ﬂ at surface.

Lowering the front ride height increases steering, but decreases traction.

Lowering the rear ride height increases traction, but decreases steering.

Part #

Description

ECX233000

Shock, Complete, (2): 4wd

ECX233001

Shock Rebuild, (2): 4wd

ECX233002

Top, Bottom Shock Ends: 4wd

ECX233003

Shock Spring, Black, Set: 4wd

FASTENERS

Description

Tapping Binder Head, M2.5x4mm

Tapping Binder Head, M3x8mm

Tapping Binder Head, M3x10mm

Tapping Binder Head, M3x12mm

Tapping Binder Head, M3x14mm

Tapping Binder Head, M3x16mm

Tapping Binder Head, M3x18mm

Tapping Binder Head, M3x20mm

Description

Tapping Binder Head, M3x22mm

Tapping Binder Head, M3x25mm

Tapping Flat Head, M2.5x10mm

Tapping Flat Head, M3x10mm

Tapping Flat Head, M3x15mm

Binder Head, M3x10mm

Binder Head, M3x12mm

Binder Head, M3x14mm

SHOCK PARTS

DIAGRAM

Part #

Description

ECX234005

Link Set, Plastic: 1:10 4wd All

ECX236001

Lock Nut, M2.5, (5)

ECX236004

Special Hardware: 1:10 4wd All

Description

Binder Head, M3x16mm

Binder Head, M3x18mm

Binder Head, M3x20mm

Binder Head, M3x22mm

Flat Head, M3x8mm

Flat Head, M3x10mm

Flat Head, M4x18mm

ECX233000

ECX234005

ECX233002

ECX233001

ECX236001

ECX236004

ECX233001

ECX233002

ECX233003

ECX234005

Description

Setscrew, M3x3mm

Setscrew, M4x3mm

Washer,

6.2x10.8x0.2mm

Washer,

3x8x1mm

Washer,

2.6x6 X0.5mm

Flanged Lock Nut, M4

Lock Nut M3

Lock Nut M2.5