DigiDesign 96i I/O Manual - Página 11

Procurar online ou descarregar pdf Manual para Sistemas de E/S DigiDesign 96i I/O. DigiDesign 96i I/O 20 páginas. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
Também para DigiDesign 96i I/O: Manual rápido (13 páginas), Manual (16 páginas)

Imprimir página
DigiDesign 96i I/O Manual

96i I/O Back Panel

INPUTS 1-4
INPUTS 5-16
SW CTRL GAIN
+4dBu/–12dBV
1
3
5
7
9
2
4
6
8
10
Figure 2. 96i I/O back panel
Analog Inputs
96i I/O provides 16 balanced, 1/4-inch TRS jacks
for analog audio input connections.
Inputs 1–4 provide six stages of software-ad-
justable operating level sensitivity. Choices
range from –12.0 dBV to +4.0 dBu, with default
sensitivity set to –8 dBV.
Inputs 5–16 are software-switchable between
–8 dBV and +4 dBu operating level sensitivity.
The 96i I/O inputs can accommodate a wide
range of line-level devices including synthesiz-
ers, samplers, sound modules, and effects de-
vices.
All analog inputs are balanced, and feature 24-
bit, 96 kHz analog-to-digital converters, with
14 dB of headroom above +4 dBu (fixed, requir-
ing no calibration). Unbalanced connections are
supported with the use of standard 1/4-inch
mono phone plugs.
96i I/O input wiring for balanced connections
Tip
Hot (or +)
Ring
Cold (or –)
Sleeve
ground
OUTPUT
+4dBu/–10dBV
11
13
15
1
12
14
16
2
Analog Outputs
These are balanced, 1/4-inch TRS jacks for ana-
log audio output connections.
The 96i I/O analog outputs feature 24-bit digi-
tal-to-analog converters. Output operating lev-
els are software-switchable between +4 dBu and
–10 dBV operating levels.
The 96i I/O is factory calibrated at +14 dB head-
room, yielding a maximum output level of
+18 dBu when in +4 dBu operating mode.
When set to –10 dBV operating mode, maxi-
mum output level is +4 dBV.
Unbalanced connections are supported through
the use of standard 1/4-inch TRS mono phone
plugs.
96i I/O output wiring for balanced connections
Tip
Hot (or +)
Ring
Cold (or –)
Sleeve
ground
Chapter 2: 96i I/O Hardware Overview
7