arcelik OI 636 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Hob arcelik OI 636. arcelik OI 636 20 páginas.
Imprimir página
It is required to leave a ventilation opening of
2
minimum 180 cm
at the rear section of the
furniture as illustrated in the following figure.
*
min. 70 mm
If the board is below:
*
min.
**
min. 70 mm
During installation of your induction hob, place
the product parallel to the installation surface.
Also, apply sealing gasket to the parts of the hob
contacting the counter as described below in
order to prevent any liquid from penetrating
between the product and the counter.
1. Prepare the surface of the counter as shown
in the figure.
2. Apply the sealing gasket provided with the
product to the edges of the hob's lower
housing that contact with the counter as
illustrated in figure.
3. Center the product in the counter.
4. Using the installation clamps secure the hob
by fitting through the holes on the lower
casing.
*
min. 40 mm
1
Hob
2
Installation clamp
3
Counter
» Rear view (connection holes)
Making connections to different holes is not
a good practice in terms of safety since it
can damage the gas and electrical system.
Final check
1. Plug in the power cable and switch on the
product's fuse.
2. Check the functions.
9/EN