Axxon LF755KB Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Placa PCI Axxon LF755KB. Axxon LF755KB 19 páginas.

Imprimir página

Installation Guide for Axxon LF755KB PCI Express (PCIe) 4 Port RS422 SMPTE I/O Card (Low/Standard Height Mounting)

Mode Configuration

This adapter card is software configurable to either MASTER (DTE) or SLAVE (DCE) modes of operation.

The current configuration software is provided in a DOS coded program and available through a no-charge ISO

download. Additional versions of this configuration software for other operating systems may be available. Please

contact our technical support staff for the latest details.

To configure the LF755KB circuit board, download and the burn using your favourite CD burning program the

following ISO image.

http://www.softio.com/axxon_pcie/axxon_pcie.iso

•

case sensitive URL

•

Please use the

Please allow your system to boot from this CD. The CD is an auto-boot CD with a freeware DOS OS.

Press "4" from the menu when presented with the 1st screen.

Then press ESC key till at the DOS prompt.

Switch to the Axxon folder for our program as follows:

cd\axxon <ENTER>

cd lf755kb <ENTER>

With our circuit board seated, run the program:

lf755kb.exe <ENTER>

lf755cnf.exe <ENTER> ; will allow for individual port configuration to either MASTER or SLAVE mode

Configure the adapter card to suit your application. Each port can be configured to either DTE or DCE

modes. The pinout details for each of the 4 ports is silk screened on the backside of the circuit board.

RS422 SMPTE DB9 Female Pinout

Master

Mode (DTE / Master / Controller)

Pin_2 = RX-

Pin_3 = TX+

Pin_7 = RX+

Pin_8 = TX-

Pin_1 = Chassis Ground

Pin_9 = Chassis Ground

Slave Mode (DCE / Slave / Emulator) (RED Led is lit)

Pin_2 = TX-

Pin_3 = RX+

Pin_7 = TX+

Pin_8 = RX-

Pin_1 = Chassis Ground

Pin_9 = Chassis Ground

Axxon Computer Corporation

V1.0

Burn an ISO Image

option for your CD burning s/w

; will move the focus to the axxon folder on the CD rom

; will move the focus to the lf755kb sub-folder within the axxon folder

; will quickly configure all Ports to MASTER (DTE) mode

(GREEN Led is lit)