Epson AcuLaser CX28 Series Manual de informações de segurança - Página 3
Procurar online ou descarregar pdf Manual de informações de segurança para Impressora Epson AcuLaser CX28 Series. Epson AcuLaser CX28 Series 5 páginas. Speedy, compact all-in-one
Também para Epson AcuLaser CX28 Series: Manual de configuração (2 páginas)
Imprimir página
■Regulation Notices
●Laser Safety
This product employs a Class 3B laser diode having maximum power of 15 mW and wavelength of 770 - 800 nm.
This product is certified as a Class 1 laser product. Since the laser beam is concealed by protective housings, the product
does not emit hazardous laser radiation as long as the product is operated according to the instructions in this manual.
●Internal Laser Radiation
Maximum average radiation power: 8.5 µW at the laser aperture of the print head unit.
Wavelength: 770 - 800 nm
Laser aperture of the print
head unit.
CAUTION:
Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in
hazardous radiation exposure.
● For European Users
This product complies with the following EU directives:
2004/108/EC, 2006/95/EC and 93/68/EEC
This declaration is valid for the areas of the European Union (EU) or EFTA only.
This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference
with radio communications and is prohibited under 2004/108/EC rules.
A USB cable installed with a ferrite core should be used for camera direct printing with this machine.
● Ozone Release
During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone adversely.
However, be sure the room where the machine is being used has adequate ventilation, especially if you are printing a high
volume of materials, or if the machine is being used continuously over a long period.
● Electromagnetic Interference
This product must be used with a shielded interface cable.
The use of non-shield cables is likely to result in interference with radio communications and is prohibited under CISPR 22
and local rules.
A USB cable installed with a ferrite core should be used for camera direct printing with this machine.
● Battery Replacement
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE USER'S GUIDE.
● For EU member states only
This product complies with RoHS (2002/95/EC) directive.
Laser Caution Label
2