Epson C094001 - FX 870 B/W Dot-matrix Printer Especificações
Procurar online ou descarregar pdf Especificações para Impressora Epson C094001 - FX 870 B/W Dot-matrix Printer. Epson C094001 - FX 870 B/W Dot-matrix Printer 12 páginas. Hi-capacity cut-sheet feeder
Também para Epson C094001 - FX 870 B/W Dot-matrix Printer: Manual de montagem (8 páginas)
Imprimir página
printer cover
paper-tension unit
Note: The power cord is attached.
Printer Specifications
Printing
9-pin impact dot
speed:
Printing
Type of letters
Print speed [cps]
High-speed draft
380
Draft pica
285
Draft elite
342
Condensed draft pica
243
Emphasized draft pica
Notes:
1) The printing speed for high speed draft is reduced to the value in "( )"
with thick paper (over 0.18 mm).
2) The printing speed for high speed draft is reduced to the value of "draft
pica" when any graphic character is in the line.
3) The printing speed for draft is reduced to the value in "[ ]" when any italic
character is in the line.
4) The speed for high duty printing is reduced to approximately half of each
speed, except for the printing speed in "[ ]".
Printing direction: Bidirectional logicseeking for text
Unidirectional for graphics
Line spacing:
increments of 1/216-&h
9-Pin Printers
release her
ribbon cartridge
matrix
(320)
10/13/92
Paper-feed speed: Friction: 69 ms/line at l/6-inch line spacing
Tractor: 77 ms/line at l/6-inch line spacing
Continuous feed: 3.7 inches per second
24 KB or 0 KB
Buffer:
(Selectable in the default setting mode)
Printable columns:
Draft, Epson Roman, or Epson Sans Serif
in normal or condensed mode. You can
also select other font/pitch combinations
using E!X/P commands.
Character tables (ESCIF Mode):
One italic and 15 graphic character tables
Europe:
One italic and 5 graphic character tables
13 international character sets
Character tables (IBM Emulation):
2 Character tables
Paper
sheets (top insertion):
Single
Width
148 to 420 mm (5.8 to 16.5 inches) for wide
max. 364 mm (14.3 inches)
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
Thickness
Weight
52.3 to 90 g/m2 (14 to 24 lb)
Single-sheet multi-partfimts:
with the optional front sheet guide.
Continuous paper:
Width
Copies
Four sheets (one original plus up to three copies)
Thickness
0.065 to 0.32 mm (0.0025 to 0.012 inch) for one sheet
0.12 to 0.32
Weight
52.3
82
to
40 to 58.2
multi-part forms
FX-870/1170
(0.0047 to 0.012 inch) total
mm
lb) for one sheet
lb) per sheet in
FX-870/1170-1