Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Manual do utilizador - Página 14
Procurar online ou descarregar pdf Manual do utilizador para Impressora Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 páginas. User guide - remote configuration manager
Também para Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer: Especificações (2 páginas), Atualização do firmware (1 páginas), Manual do utilizador (15 páginas)
Imprimir página
11. Turn on the printer if it is off. You hear the print head move to the left and
appears on the LCD. Either the front or rear
Ready
lights up to indicate the tractor that was selected last.
12. If the rear tractor arrow light is red, press the
paper.
rear
front
If the front tractor arrow light is red, press the
to the rear tractor. When the printer switches tractors, it loads the paper
automatically.
The rear tractor arrow light turns green and the paper is loaded to the top-of-
form position. If you need to adjust the paper position, see "Adjusting the Paper
Position" in your on-screen Reference Guide.
14 Switching Between Front and Rear Tractors
arrow
Tractor Select
button to load the
LF/FF Load
button to switch
Front/Rear
Switching Between Front and Rear Tractors
You can easily switch between paper loaded on the front and rear tractors, and
vice-versa. Just wait for any print jobs to finish before switching tractors.
Caution:
c
Never switch between tractors if labels are loaded in the printer. First remove
the labels by tearing off the fresh supply below the tractor and pressing
to eject the remaining labels.
LF/FF Load
1.
Turn on the printer.
2.
If no paper is loaded in the front or rear tractor, load it as described on
page 9 (front) or page 12 (rear).
3.
To tear off any printed pages or excess
paper, press the
button and
Tear Off
tear off the pages at the perforation.
Caution:
c
Always tear off the printed
document and any excess paper
before switching tractors. If the
perforation does not align with the
tear-off edge, you can adjust it. See
"Adjusting the Tear-Off Position"
in your on-screen Reference Guide.
4.
Press the
button to switch
Front/Rear
to the other tractor. The selected
tractor light turns green and the paper
advances to the top-of-form position.