Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Manual do utilizador - Página 24
Procurar online ou descarregar pdf Manual do utilizador para Impressora Epson C11C640001 - LX 300+II B/W Dot-matrix Printer. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 50 páginas. Epson lx-300: user guide
Também para Epson C11C640001 - LX 300+II B/W Dot-matrix Printer: Manual (17 páginas)
Imprimir página
4.
Press the LF/FF D button to move the top-of-form position higher on
the page, or press the Load/Eject U button to move the top-of-form
position lower on the page.
Note:
❏
The printer has a minimum and a maximum top-of-form position. If
you try to adjust it beyond these limits, the printer beeps and stops
moving the paper.
❏
When the paper reaches the default top-of-form position, the printer
beeps and stops moving the paper briefly. You can use the default
position as a reference point when adjusting the top-of-form position.
5.
After you set the top-of-form position, press the Pause button to
exit the Micro Adjust mode.
Note:
❏
Your top-of-form position setting remains in effect until you change it,
even if you turn off the printer.
❏
The top margin setting made in some software applications overrides the
top-of-form position setting you make with the Micro Adjust feature. If
necessary, adjust the top-of-form position in your software.
❏
If you want to restore the printer's default top-of-form position, you can
reset the printer. See page 37 for instructions.
24
Paper Handling