Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Manual do utilizador - Página 27
Procurar online ou descarregar pdf Manual do utilizador para Impressora Epson C11C640001 - LX 300+II B/W Dot-matrix Printer. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 50 páginas. Epson lx-300: user guide
Também para Epson C11C640001 - LX 300+II B/W Dot-matrix Printer: Manual (17 páginas)
Imprimir página
When you resume printing, the printer automatically feeds the paper
back to the top-of-form position and begins printing.
Note:
Your tear-off position setting remains in effect until you change it, even if you
turn off the printer. (If you want to restore the printer's default tear-off position,
you can reset the printer. See page 37 for instructions.)
Printing on Single Sheets
You can load single sheets of paper one at a time using the printer's
paper guide.
Before printing on single-sheet multipart forms, envelopes, or other
special paper, make sure the paper thickness lever is set to the
appropriate position. See "Printing on Special Paper" on page 29.
Note:
❏
Load only one sheet at a time. To load a stack of single-sheet paper, use the
optional cut-sheet feeder. See the Reference Guide for more information.
❏
You can use the paper guide to load single-sheet carbonless multipart forms
that are fastened at the top by line gluing.
❏
Insert multipart forms in the paper guide, bound edge first and printable
side down.
Follow these steps to load a single sheet:
1.
If continuous paper is loaded in the push tractor, press the
Load/Eject
button to feed it back to the standby position.
Paper Handling
27