Epson C31C564011 - TM P60 B/W Thermal Line Printer Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Impressora Epson C31C564011 - TM P60 B/W Thermal Line Printer. Epson C31C564011 - TM P60 B/W Thermal Line Printer 8 páginas. User manual

Imprimir página
2.
Input the IP address of the TM-P60 in the browser address bar and press Enter (Example: http://
192.168.192.168 [default]).
3.
The browser displays a dialog box requesting a user name and password. Click OK without entering any
user name or password. (If you have changed the user name and password, you need to input them.)
You can modify the parameters by following the menus. You must click Submit to send the change to the
4.
printer and then click Reset to make the submission effective on each Web page. If you change the IP
address, SSID, etc., you have to change the setting of the host PC and AP to match the printer's setting.
❏
Using the TMNetWinConfig (version 2.0) and the TM-P60 Technical Reference Guide
For details, go to the following web site: http://pos.epson.com/

Specifications

Print method
Print density
Printing width (default)
Print font
Font
Characters per line
Character size
(W × H)
Character set
Paper
Roll paper
dimensions (default)
Paper thickness
Paper roll spool
diameter
Specified thermal
paper
Print speed
Interface
Receive buffer
Power
Specified battery
consumption
AC adapter (option) Output voltage: DC 12 V
Life
Mechanism
Print head
Autocutter
Temperature/
Operation
humidity
(Printing quality
guaranteed)
Storage
Overall dimensions (mm)
Mass (with the battery, without roll
paper)
Note: For the battery specifications, see its instructions.
Thermal line printing
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
52.5 mm, 420 dot positions
Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16
Font A: 35, Font B: 42, Font C: 52
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
95 Alphanumeric, 48 International, 128 × 10 Graphic
57.5 ± 0.5 mm
(59.5 ± 0.5 mm by removing the spacer installed)
50 µm ~ 80 µm
18 mm outside
Original: Kanzaki Specialty Paper (USA): P350 (paper thickness: 62 µm),
P310 (paper thickness: 58 µm), P300 (paper thickness: 56 µm)
Maximum 70 mm/s, when number of dots per dot line is 64 dots or less
(printing with a fully charged battery, at 25°C, print density 100%)
RS-232C, IEEE802.11b
128 bytes
Lithium-ion battery: Product name: LIP-2500, Trade name: Seiko Epson
Corporation
Output: DC 7.4 V
Capacity: 2200 mAh
Input voltage: AC 100 V ~ 240 V
Product name: PS-10, Trade name: Seiko Epson Corporation
10,000,000 lines printing
100,000,000 dots
500,000 cuts
5 ~ 45°C, 10 ~ 90% RH
Abnormal operations not found when the printer is left under the
environment of 25°C, 60%RH for 2 hours after it was left in the following
conditions:
High temperature and humidity: 50°C, 90% RH for 120 hours
High temperature: 70°C for 120 hours
Low temperature: -25°C for 120 hours
103 × 159 × 65 (W × D × H)
Approx. 670 g
6