Aydin Displays VFP15 series Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Monitor Aydin Displays VFP15 series. Aydin Displays VFP15 series 14 páginas. 15” flat panel display

Imprimir página

TROUBLESHOOTING:

NO PICTURE:
•
If the Amber NO SYNC LED is lit, verify that the signal cable is properly connected to the display
and computer.
•
The Green ON LED should be lit.

IMAGE PERSISTENCE:

•
Image persistence is when a "ghost" of an image remains on the screen even after the monitor has
been turned off. Unlike CRT monitor, LCD monitors' image persistence is not permanent. To alleviate
image persistence, turn the monitor off for as long as an image was displayed. If an image was on the
monitor for one hour and a "ghost" of that image remains, the monitor should be turned off for one
hour to erase the image.
IMAGE IS UNSTABLE, UNFOCUSED OR SWIMMING IS APPARENT:
•
Signal cable (video) should be completely attached to the computer and display.
•
Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the FINE
setting. When the display mode is changed, the OSM Image Adjust settings may need to be re-
adjusted.
DISPLAY IMAGE IS NOT SIZED PROPERLY:
•
Use the OSM Image Adjust controls to increase or decrease the H. SIZE setting.

CUSTOMER SERVICE CONTACT INFORMATION:

Ted Trombley
Document No. 150-VFP5-003 Rev. A, May 2004
Phone: 610-404-5370
11