Aydin Displays VFP15 series Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Monitor Aydin Displays VFP15 series. Aydin Displays VFP15 series 14 páginas. 15” flat panel display

Imprimir página

DISPLAY ADJUSTMENTS:

If you have any problems connecting, setting-up, or operating the display, please refer to the

Troubleshooting section of this guide.

Connect one end of the video cable to the HD15 connector on the rear of the display and the other

end to the HD15 on the computer.

If a Touch Screen option has been provided, connect the interface cable from the touch interface

connector on the rear of the display to the proper RS232 Serial Controller.

Plug the power cord into the rear of the display and then plug the cord into an AC power source.

Turn on the display. The Green ON LED should light. If the Amber NO SYNC LED is lit, refer

to the Troubleshooting section.

CONTROLS:

On-Screen-Menu (OSM) Controls:

The OSM controls on the front of the monitor functions as follows:

To access the OSM menu, press any of the Adjust buttons (–, +) or Control buttons (< , >)

or the "NEXT" (SELECT) button.

Control

EXIT

-/+

</>

(SELECT)

RESET

Note: When "RESET" is pressed, a warning window will appear allowing you to cancel the reset function.

BRIGHTNESS/CONTRAST CONTROLS:

BRIGHTNESS:

Adjusts the overall image and background screen brightness.

CONTRAST:

Adjusts the image brightness in relation to the background.

AUTO ADJUST CONTRAST:

Adjust the image displayed for non-standard video inputs.

Document No. 150-VFP5-003 Rev. A, May 2004

Main Menu

Exits the OSM controls.

Moves the highlighted area left/right to

select desired sub-menus.

Selects the highlighted submenu of the

Main Menu.

Resets the adjustment function within the

highlighted area to the factory setting.

Sub-Menu

Exits to the OSM controls main menu

Moves the bar left/right to increase

or decrease the selected adjustment.

Moves the highlighted area

to select one of the functions.

Activate Auto Adjust Function or

Activate Selected submenu.

Resets the highlighted adjustment

function to the factory setting.