Architectural Area Lighting PROS Providence Small Manual de instalação - Página 6

Procurar online ou descarregar pdf Manual de instalação para Luz exterior Architectural Area Lighting PROS Providence Small. Architectural Area Lighting PROS Providence Small 15 páginas. Led upgrade kit

Imprimir página
INSTALLATION INSTRUCTIONS
WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER
REPRODUCTIVE HARM. THOROUGHLY WASH HANDS AFTER INSTALLING, HANDLING, CLEANING OR OTHERWISE TOUCHING THIS PRODUCT.
CONNECTORS
BALLAST
FIXTURE
WIRE CONNECTIONS
(BY OTHERS)
3" O.D. POLE (REF)
CLOSED
FITTER CAP DETAIL
INSTALLATI O N STEPS:
1.
TURN OFF POWER.
2.
MAKE WIRE CONNECTIONS FROM INCOMING WIRE LEADS
TO ARM LEADS, AS SHOWN. (WHITE TO COMMON, BLACK
TO HOT AND GREEN TO GROUND). NOTE: ASSEMBLY MUST
BE GROUNDED TO THE INCOMING EQUIPMENT GROUND
SUPPLY.
3.
SLIP FIXTURE OVER POLE, AND SECURE FIXTURE TO POLE
WITH (3) 5/16-18 x 1/4" SET SCREWS.
4.
INSTALLATION COMPLETE.
14249 Artesia Blvd. P.O. Box 1869
(714)994-2700 fax(714)994-0522
OPEN
1
5/16-18 X 1/4"
SET SCREW S/S
(3) P/N 93007472
La Mirada, CA 90638-1869
LATCH
DOME
2
TABS
FITTER CAP
LAMP (REFERENCE)
(BY OTHERS)
1
INCOMING
WIRE LEADS
BALLAST SERVICING:
1.
TURN POWER OFF.
2.
PULL LATCH AND RAISE DOME TO ACCESS BALLAST.
3.
UNPLUG ALL CONNECTORS AND REMOVE (2) SCREWS
TO RELEASE BALLAST,
4.
SERVICE BALLAST.
5.
PLUG IN ALL CONNECTORS, RE-INSTALL BALLAST
AND SECURE WITH (2) SCREWS. CLOSE DOME AND
LATCH SECURELY.
6.
BALLAST SERVICING COMPLETE.
LAMP SERVICING:
1.
TURN POWER OFF.
2.
ROTATE FITTER CAP COUNTER CLOCKWISE, UNTIL
FREE FROM FIXTURE. (SEE FITTER CAP DETAIL)
3.
LIFT FITTER CAP WITH REFLECTOR FROM FITTER.
4. INSTALL LAMP (BY OTHERS).
5.
CAREFULLY PLACE FITTER CAP INTO FITTER,
ROTATE FITTER CAP CLOCKWISE UNTIL TABS
SNAP SECURELY INTO FITTER.
6.
LAMP SERVICING COMPLETE.
2
8-32 X 1/4"
PHMS S/S
(2) P/N A84031
PROS IND
DATE
APPRVD
PART NO.
DATE
REV.
CATALOG NUMBER
A96482