CREE LIGHTING CPY Series Instruções de desmontagem - Página 2

Procurar online ou descarregar pdf Instruções de desmontagem para Luminária CREE LIGHTING CPY Series. CREE LIGHTING CPY Series 3 páginas. Led retrofit recessed

Imprimir página

Disassembly Instructions

Power Supply (PS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI039RLER0 Rev: 00

Fig.2

Fig.3

PS-EU

a.The power supply is not replaceable by the end user by

construction; only a technical operator at the production

site can replace the components

PS-CA

A.Access the wiring compartment by unscrewing the four

screws 3 on cover 2 of the device (Fig.2)

B.Disconnect the cables connected to driver 6 on its termi-

nal block 4 and 5 (Fig.2)

C.Remove driver 6 from metal plate 7 (Fig.2)

D.If present, disconnect the sensor 6 and module 3 cables

from connector 11 (Fig.3)

E.Unscrew the screws of module 3 and sensor 6 from hou-

sing 1(Fig.3)

F.Replace the driver, module and sensor with new compo-

nents (if necessary) (Fig.3)

G.Reconnect the cables to connector 11 and terminal bloc-

kers of the new driver (Fig.2 and 3)

H.Close the wiring compartment by screwing the four

screws 3 with a torque of 4 Nm (Fig.2)

Latest release date: 09/11/2021