ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000 Manual de início rápido - Página 10
Procurar online ou descarregar pdf Manual de início rápido para Router sem fios ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000. ARCHITECTURE TECHNOLOGY CORPORATION CRR-1000 18 páginas.
Imprimir páginaCRR-1000 Quick Start Guide
babel
bandwidth
delay
description
eigrp
end
exit
find
ip
ipv6
isis
link-detect
link-params
list
multicast
no
openfabric
output
pbr-policy
quit
shutdown
tunnel
vrrp
CRR(config-if)# ip
address
authentication
hello-interval
hold-time
igmp
irdp
interface
mroute
multicast
nhrp
ospf
pim
rip
router
summary-address
CRR(config-if)# ip address
A.B.C.D
A.B.C.D/M
CRR(config-if)# ip address 10.1.2.3/24
CRR(config-if)# exit
CRR(config)# exit
CRR#
To leave the FRR CLI shell and go back to the main CRR CLI shell enter the command:
CRR# exit
crr@CRR>
5.2 ARES Configuration
ARES service configuration is handled by editing JSON-formatted files that are syntactically verified and
processed by the system. For further information regarding JSON syntax, see https://www.json.org/
Babel interface commands
Set bandwidth informational parameter
Specify interface throughput delay
Interface specific description
EIGRP information
End current mode and change to enable mode
Exit current mode and down to previous mode
Find CLI command containing text
IP information
IPv6 information
IS-IS routing protocol
Enable link detection on interface
Configure interface link parameters
Print command list
Set multicast flag to interface
Negate a command or set its defaults
OpenFabric routing protocol
Direct vtysh output to file
Policy to use
Exit current mode and down to previous mode
Shutdown the selected interface
NHRP/GRE integration
Virtual Router Redundancy Protocol
Tab
Set the IP address of an interface
Authentication subcommands
Configures EIGRP hello interval
Configures EIGRP IPv4 hold time
Enable IGMP operation
Alter ICMP Router discovery preference on this
Add multicast route
Generic multicast configuration options
Next Hop Resolution Protocol functions
OSPF interface commands
PIM information
Routing Information Protocol
IP router interface commands
Perform address summarization
Tab
Local IP (e.g. 10.0.0.1) for P-t-P address
IP address (e.g. 10.0.0.1/8)
8