Creek Audio CD43 mk 2 Manual de Instruções - Página 12

Procurar online ou descarregar pdf Manual de Instruções para Leitor de CD Creek Audio CD43 mk 2. Creek Audio CD43 mk 2 17 páginas. Creek audio cd player operating instructions cd43 mk 2

Imprimir página

1. Specification

CD43 mk2

TO SEARCH QUICKLY FOR A

PARTICULAR POINT O F A

T R A C K

During P L AY mode press and hold the

buttons for fast-forward and

fast-back operation.

During PL AY mode:

When

the sound will be muted to about 1/4 of

the normal volume level for the

duration of the fast-forward or fast-

back operation.

During PAUSE mode:

Pressing

release the pause mode and the

search will continue normally with a

muted sound.

During the

first few seconds the player will search

slowly through the disc and then switch to

searching fast.

FAST SEARCH

(Remote control only)

Using the remote control only, the fast

search can be enabled by pressing the

FAST button before pressing the search

buttons.

RANDOM / SHUFFLE PLAY

Use this feature to play tracks on a disc in

a random order.

1. Press the RANDOM button on the front

panel or the SHUF button on the

remote handset.

2. Press the P L AY button. A track will be

randomly selected and the disc will

start playing.

When the R A N D O M / S H U F

NOTE:

button is pressed during play, the whole

calendar is displayed and random play

Compact Disc Player

button is pressed,

buttons will

operation, for the

starts at the end of the current track.

PROGRAMMED DISC PLAY

( Remote control only)

This feature allows you to play tracks in your

preferred sequence.

It is not possible to program the CD player

while the disc is playing. Press the S TO P

button first, then enter a program.

ENTERING A PROGRAM

To program a desired sequence of tracks:

1. Select the first track using the

numeric buttons. Press the PROG button

on the remote handset. The M E M O RY

indicator will illuminate and the track

number will be displayed on the calendar.

The first selected track is now stored in the

memory.

2. Select the next track number using the

or numeric buttons. Press the P R O G

button again - the second choice is now

stored in the memory.

3. Repeat the steps above until all the desired

tracks are stored in the memory.

The complete programmed sequence is

displayed on the calendar.

EXAMPLE

To play track 5, track 2 and track 8 in

sequence:

Enter the first choice by selecting track

5 using the

Press the PROG button to store the

first choice. Track

The time display will toggle between

P: 1 and the playing time of the

selection.

Enter the second choice - track 2 using

the

or numeric button. Press the

P R O G button to store the second

choice. Track

or numeric button.

is now stored.

is also stored.