Ayra FLASH 1500D Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Ayra FLASH 1500D. Ayra FLASH 1500D 10 páginas. 1500w dmx strobe
Imprimir página
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet.
The unit will activate directly after it is plugged in to a wall outlet or other power source.
This device is equipped with dipswitches on the rear, to determine the active working mode and/or DMX
address.
There are 10 dipswitches, each with their own function. The working modes can be activated by turning the
dipswitches on and off in certain combinations.
Auto/manual mode: Dipswitch 10 on, other dipswitches off
DMX mode: Dipswitch 10 off, other dipswitches will determine the DMX-address.
The DMX address is used to place the device on a certain channel in a DMX-chain. This makes controlling
the device with a DMX-controller easier.
Set the correct address by using the dipswitches. Every switch has its own value and by combining values, it
is possible to choose every address between 1 and 512.
Dipswitch 1:
1
Dipswitch 2:
2
Dipswitch 3:
4
Dipswitch 4:
8
Dipswitch 5:
16
Dipswitch 6:
32
Dipswitch 7:
64
Dipswitch 8:
128
Dipswitch 9:
256
Example: When you wish to turn the fixture to starting address 19, you add the highest numbers possible to
select the channel.
When you want to set the device to DMX-address 19, add dipswitch 5, 2 and 1. (16 + 2 + 1 = 19)
The FLASH 1500D can be controlled with 2 DMX-channels. Each channel has its own function.
DMX channel 1: Speed 0 – 512 (slow to fast)
DMX channel 2: Dimmer 0 – 512 (0-100%)