Accurion halcyonics i4 M6/25 Manual de Instruções - Página 10
Procurar online ou descarregar pdf Manual de Instruções para Equipamento de laboratório Accurion halcyonics i4 M6/25. Accurion halcyonics i4 M6/25 13 páginas. Active vibration isolation desktop unit
Imprimir páginaSpecifications
Available Standard Versions
halcyonics_i4
halcyonics_i4 M6/25
Performance Specifications
Isolation Technology:
Force directions:
Isolation performance:
Active bandwidth:
Settling time:
Response time:
Max. correction forces:
Load capacity:
Other Specifications
Dimensions:
Weight:
Table top material:
Top plate surface flatness:
Max. compensation level:
Repeatability of load
adjustment:
Environmental and Operational Requirements
Electrical voltage:
Fuse (inside i4):
Power consumption:
Operating temperature:
Operating humidity:
Operating altitude:
Operating condition:
Pollution degree:
*
Floating table top is supported by steel springs; low-pass characteristics of spring-mass combination
dominates the dynamic behaviour above 200 Hz.
** The settling time and maximum compensation level depend on several conditions, such as payload, frequen-
cy, load distribution and height of the payload. For that reason this value should be considered as an estima-
tion.
*** The response time determines when the system starts to actively isolate an incoming vibration after detec-
tion by the sensors.
halcyonics_i4medium
halcyonics_i4medium M6/25
halcyonics_i4medium 150 kg
halcyonics_i4medium 150 kg M6/25
Accurion control technology based on piezoelectric type acceleration pickup, fast
signal processing and electro-dynamic type force transducers
Active compensation in all six degrees of freedom
> 5 Hz = 25 dB (94.4%); >10 Hz = 40 dB (99.0%)
0.6 – 200 Hz*
300 ms**
0.5 ms***
Vertical ± 8 N; horizontal ± 4 N
i4: 0 – 120 kg (0 - 265 lbs) / i4medium + i4 large: 0 - 105 kg (231 lbs) or
40 - 150 kg (88 - 330 lbs)
i4: 400 x 500 x 90 mm (15.7" x 19.7" x 3.5") / i4medium: 600 x 600 x 90 mm (23.6"
x 23.6" x 3.5") / i4large: 550 x 700 x 92 mm (21.7" x 27.6" x 3.6")
i4: 20 kg (44 lbs) / i4medium: 37 kg (81 lbs) / i4large: 40 kg (88 lbs)
Powder coated aluminium
± 0.10 mm over complete surface
500 µm/s at 6 Hz and with a load of 60 kg (132 lbs)**
120 µm
100 - 240 V AC/47 – 63 Hz
250V / F3,15A (Fuse may be changed by authorized service staff only!)
Typically 40 - 45 W
15 – 40°C (59 – 104 F)
0 – 60%
< 2500 m (8100 ft)
Use in non-mobile laboratories only
2 (according to DIN EN 61010-1)
halcyonics_i4large
halcyonics_i4large M6/25
halcyonics_i4large 150 kg
Halcyonics_i4large 150 kg M6/25
- 10 -