Crenova XPE498 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Projetor Crenova XPE498. Crenova XPE498 13 páginas.

the projector and unplug the power cord.

Projector Cleaning

Always keep the projector clean to avoid affecting image quality and ventilation system during

working caused by dust, dirt and smudge.

Use a piece of dry, soft and lint-free cloth to remove dust or dirt.

Use a piece of moistened and soft cloth with a little water and mild soap to remove stubborn dirt.

Cleaning the Lens

Gently wipe the lens with a piece of dry and non-abrasive cloth or paper to remove dust or dirt.

Gently wipe the lens by a piece of moistened (with a little water), non-abrasive and lint-free cloth

to remove stubborn dirt.

Cleaning the Vents

Use a soft brush or a special designed small vacuum to remove the dust.

Note: For cleaning process, do Not spray any liquid (included water) directly on any parts of the

projector. Do Not use the chemical detergents to clean the projector which will damage the

projector.

Projector Maintenance

For this part, we only offer the basic maintaining suggestions. If you have any further

requirements (replacement or repair), please contact the dealer or qualified customer service

team.

Batteries Replacement of the Remote Control

If batteries have run out, please replace the batteries by following steps:

1. Open the battery cover of the remote control.

2. Insert the batteries with the + and – ends facing as shown.

3. Close the battery cover and press it down until it clicks into place.

Technical Specifications

To know product better and use projector properly, please read the table below:

Imaging Technology

Native Resolution

Maximum Supported Resolution

Light

Lens

Keystone

Screen Size

TFT LCD

800 x 480 pixels

1920 x 1080 pixels

LED

Multichip Coated Lens (F=126)

± 15 ° Correction

37-130 inches