Crenova 6016A Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Multímetro Crenova 6016A. Crenova 6016A 10 páginas. Clamp digital multimeter

Technical index of ACA:

Range

Accuracy

±(3.5%+15d

)

20A

±(3%+10d)

200A

±(3%+10d)

600A

±(3.5%+15d

)

Note: frequency response: 50Hz;

Maximum input 600A, input time should not exceed 1 minute.

At AC gear, if clamp meter is near to a strong magnetic field,

it will indicate unstable or incorrect induction reading,

but it will not affect measurement result.

IX. Service and maintenance

Warning:

Before open the bottom cover, please remove test rod first to avoid electric shock.

1.Ordinary servicing

1-1. This clamp meter is a high precision instrument. User is not allowed to modify circuit;

1-2．Please keep it from water and dust, do not bump or drop the meter;

1-3 ． Do not store or use the clamp meter in high temperature, high humidity, inflammable, explosive

environment or strong magnetic field;

1-4．Please use wet cloth and gentle cleaning agent to clean surface of the clamp meter. Do not use strong

solvent such as abradant or ethyl alcohol;

1-5．If the meter will not be used for a long time, please take batteries out in case of leaking liquid of

batteries, which will corrode the clamp meter;

1-6. Do not let the peak value of DC or AC voltage input higher than 600V;

1-7.Do not measure voltage on current gear, resistance gear, diode gear and buzzer gear;

1-8.Do not use the clamp meter if the battery is not installed or

rear cover is not tightened.

2.Install or replace batteries

When the meter is in use, please be noted that the service condition of 1.5V batteries. If the screen shows

, please replace batteries according to Figure 7.

Resoluti

0.001A

0.01A

0.1A

Figure 6