Accuris E2301 Series Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Fonte de alimentação Accuris E2301 Series. Accuris E2301 Series 6 páginas. 300v power supply
Imprimir página4. Installation
Place the power supply on a smooth, level surface in an area
where it will not contact liquids or chemicals.
The myVolt Power Supply features "Dual Orientation"
technology, so it can be placed horizontally or vertically on
the laboratory bench or shelf. The display screen system is
designed to recognize its orientation and the display will
rotate automatically to be right-side-up.
Vertical
Orientation
Connect one end of the included power cord to the
instrument and the other end to an appropriate electrical
outlet. Check the Rating/Serial # label on the rear of the
power supply for the required electrical input.
Horizontal
Orientation
4
5. Warnings
To avoid electrical shock, do not use this product with wet
hands and ensure that all electrical leads being used are
dry. Only use electrical leads that offer sufficient
protective insulation and gel boxes that have appropriate
safety lid systems and are rated for the appropriate
voltage and amperage levels.
Please carefully read this instruction manual before
operation to avoid any personal injury. Only trained
laboratory personnel should operate the system.
Do not attempt to open or repair the MyVolt Power Supply.
Contact Benchmark Scientific for service.
Always use the MyVolt Power Supply in an environment
with low humidity and low dust, also keep it away from
water, direct sunlight / strong light, corrosive gas, high
magnetic fields, heaters, fires and other heat sources.
6. Operating guide
6.1 Touch Screen Control
Adjustable
Parameters
Status
Operation
Buttons
Up/Down
Value
Adjust
Buttons
5