Creos Smarty 100A Descrição técnica - Página 16

Procurar online ou descarregar pdf Descrição técnica para Instrumentos de medição Creos Smarty 100A. Creos Smarty 100A 20 páginas. Functionalities of intelligent electricity meters

Imprimir página

1. Table of Contents

For reasons of privacy, data sent via this port is encrypted. The

decryption key is available from your grid operator or your supplier.

Please contact your energy supplier for information about the

available connection tools.

M-B-us

The letters O and F indicate that the relay is open (O) or closed (F).

If the two built-in relays on the meter are not enough, an additional module

containing three more relays can also be fitted.

It is strictly forbidden for customers to interfere with these relays.

All tampering is detected.

Next to these two relays, Smarty also has a built-in M-Bus port that enables

an intelligent gas, water or heat meter to be connected.

Customer port

Your Smarty intelligent electricity meter has a

customer port that provides access to your "high

resolution" data (10 seconds).

To access the RJ12 (standard telephone) socket that

enables you to connect a remote screen or smart

home system, pull on the green flap and slide it

downwards. Connect the plug and close the flap

again.

Built-in relays

Smarty, your intelligent electricity meter includes

two output relays or contacts enabling it to control

electrical loads such as, for example, an electric

heater or even an electric car.

These relays can be controlled independently either

via a fixed schedule programmed directly on the

M-B-us

meter or via a variable control system based on a

command sent on demand. Charge control services

may be offered to the customer by either the

network administrator or the supplier.