DigiLand MDT1001 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Leitor de DVD DigiLand MDT1001. DigiLand MDT1001 16 páginas.

1.2 Buttons

Volume
Press
/
to adjust volume.
Return button
Press
to Return or Exit DVD mode
Power button
Power on
Long press
2~3 seconds, screen will light up and pictures will show up until
the interface page.
Power Off
Long press
,it will show Power off , Reboot , Airplane mode button,choose
Power off
Reboot
Long press
,it will show Power off , Reboot , Airplane mode button,choose
Reboot ,to reboot the unit.
Airplane mode
Long press
,it will show Power off , Reboot , Airplane mode button,choose
Airplane mode, to set the unit in airplane mode .
Sleep mode (only in tablet mode)
In boot mode, when tapping
turns black, which can save power.
Tap again to go back and light up screen for further operation.
Open loader
Press
,user can open the loader and take in or out the disc.
Lock and unlock the screen
LOCK
You can setup sleep time in the Settings, choose Display.
The system will enter into sleep mode automatically and lock the screen to
standby mode, if without operating exceeding preset time.
UNLOCK
Pull down
and drag

1.3 Connections

Earphone jack: To connect external earphone
Micro USB jack: For both power supply input and connecting with PC (for the
latter, require an additional OTG cable which is not included in this device.)
HDMI jack: To show video to another TV with HDMI to achieve high
resolution video quality. (This requires a separate HDMI cable, which is not
included in this device.)
Micro SD slot : to insert a Micro SD per instruction.
RESET: To restart the system if abnormal situation happen and the device can't
be turned down. Use a thin object (like the end of a paper clip) to press RESET,
located in the middle of the right side, the device will be reset and power turns off.
Press
2~3 seconds to restart.
MIC: To record if turned on recording function.
to shut off the unit.
,the system will go into standby mode with screen
to unlock the screen and enter application interface.
2