FIAM. MACRAME MC/60FU Informações sobre o produto - Página 6

Procurar online ou descarregar pdf Informações sobre o produto para Mobiliário de interior FIAM. MACRAME MC/60FU. FIAM. MACRAME MC/60FU 17 páginas.

MACRAMÉ Low Table

Art. MC/130X/130BR/130FU - MC/90X/90BR/90FU - MC/60X/60BR/60FU -

MC/50X/50BR/50FU

Read this information carefully before using the product and keep it for

future reference. Failure to comply carefully with the instructions which

follow may put the safety of the product and its users at risk.

Product description and intended use

• Product description and composition

The MACRAMÉ Low Table - Art. Code MC/130V/130X/130BR - MC/90V/90X/90BR - MC/60V/60X/60BR - MC/50V/50X/50BR

is a Low Table intended as an item of indoor furniture. It is manufactured from curved float plate glass. The MACRAMÉ Low Table

was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax:

+39.0721.202432 - www.fiamitalia.it

• Intended use

The article known as MACRAMÉ is designed and built to serve as a Low Table for indoor use and must therefore be used only for

this purpose and no other.

For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions

provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the

telephone numbers stated in this document.

• Transporting and storing the MACRAMÉ Low Table in the original packaging

The MACRAMÉ Low Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.

It must be stored indoors in a dry place.

Place the MACRAMÉ Low Table in the original packaging, in the horizontal position. The arrows on the label on the packaging

must be vertical and pointing upward.

Never place weights or loads in excess of 100 Kg on the original packaging, since exceeding this weight may cause the breakage

of the article.

The MACRAMÉ Low Table in the original packaging weighs about 77 kg max.

It must therefore be placed on surfaces capable of supporting its weight.

• Removing the packaging - assembly

To remove the original packaging of the MACRAMÉ Low Table, proceed as follows.

a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.

b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may

damage the MACRAMÉ Low Table.

c) Remove the MACRAMÉ Low Table from its packaging. At least two people are required for this operation. Wear gloves which

assure a good grip on the float glass.

6/16