Digilent chipKIT Uno32 Manual de referência - Página 12
Procurar online ou descarregar pdf Manual de referência para Microcontroladores Digilent chipKIT Uno32. Digilent chipKIT Uno32 18 páginas.
Imprimir páginachipKIT Uno32 Reference Manual
Pinout Tables
The following tables give the relationship
between the chipKIT digital pin numbers, the
connector pin numbers and the microcontroller
pin numbers.
In the following tables, columns labeled
chipKIT pin # refer to the digital pin number.
This is the value that is passed to the
pinMode(), digitalRead(), digitalWrite() and
other functions to refer to the pin.
For most pins, this pin number will agree with
the pin number labeled on the board. For the
pins whose function can be switched using
jumpers, the pin number labeled on the board
is correct when the jumper is in the 'normal'
position.
Pinout Table by Logical Pin Number
chipKIT
Connector
PIC32
Pin #
Pin #
Pin #
0
J6-01
34
1
J6-03
33
2
J6-05
42
3
J6-07
46
4
J6-09
59
5
J6-11
49
6
J6-13
50
7
J6-15
43
8
J5-01
44
9
J5-03
51
10
J5-05
52
11
J5-07
6
12
J5-09
5
13
J5-11
4
14/A0
J7-01
14
15/A1
J7-03
12
16/A2
J7-05
21
17/A3
J7-07
23
18/A4
J7-09
27
www.digilentinc.com
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
PIC32 Signal
U1RX/SDI1/RF2
U1TX/SDO1/RF3
IC1/RTCC/INT1/RD8
OC1/RD0
RF1
OC2/RD1
OC3/RD2
IC2/U1CTS/INT2/RD9
IC3/PMCS2/PMA15/INT3/RD10
OC4/RD3
PMWR/OC5/IC5/CN13/RD4
SDO2/PMA3/CN10/RG8
SDI2/PMA5/CN8/RG7
SCK2/PMA5/CN8/RG6
C2IN-/AN2/SS1/CN4/RB2
C1IN-/AN4/CN6/RB4
U2CTS/C1OUT/AN8/RB8
TMS/CVREFOUT/PMA13/AN10/RB10
TCK/PMA11/AN12/RB12
For example: The normal position for JP4 is
the RD4 position. The digital pin number for
the microcontroller signal RD4 is 10. With JP4
in the RD4 position, digital pin 10 is connected
to the pin labeled 10 on the board. The
alternate position for JP4 is the RG9 position.
The digital pin number for the microcontroller
signal RG9 is 44. With JP4 in the RG9
position, digital pin 44 is connected to the pin
labeled 10 on the board, and digital pin 10 is
not connected.
The pin labeled 10 on the board is connected
to connector J5 pin 5. This is shown as J5-05
in the following tables. In the 'Pinout Table by
Shield Connector Pin' table below, J5-05 is
shown has being either chipKIT pin # 10 or 44.
J5-04 is connected to chipKIT pin # 10 when
JP4 is in the RD4 position and is connected to
chipKIT pin # 44 when in the RG9 position.
Notes
selected by JP4, also on J8-6
selected by JP5, also on J8-1
selected by JP7, also on J8-4
also on J8-3, User LED LD4r
selected by JP6
page 12 of 17