ARCHPOT AWEIS Manual de instalação e operação - Página 6

Procurar online ou descarregar pdf Manual de instalação e operação para Lareira exterior ARCHPOT AWEIS. ARCHPOT AWEIS 12 páginas. Apf burner system

3. The natural gas source line and low voltage A/C power must

be installed underground between each vessel, as shown in

Figure 2. The natural gas source line must be reduced to 1/2"

NPT for fire tables 42"+ and 3/8" NPT for fire vessels 24" - 36".

4. Using thread sealer, attach supplied flex line to natural gas

source line. Then attach the other end of the flex line to key

valve assembly as shown in photo. Do not kink or make a tight

radius bend on the gas hose.

5. Using thread sealer, attach the second supplied flex line to

the other side of the Key Valve Assembly making sure of proper

gas flow direction towards the burner.

6. Take the Completed Burner Assembly and attach the Yellow

and Blue wires from the AWEIS Control Module to the low

voltage A/C power source previously installed.

7. Using thread sealer, attach the flex line to the bottom of the

AWEIS Control Module.

8. Check all gas connections are tight, position the burner

assembly so that it sits level in the bowl. Rotate as required so

that the gas hose rests in a compact position.

Key Valve Assembly

(Inside View)

Key Valve Assembly

(Outside View)