Digilock ADA User Key Operação e programação rápidas - Página 2
Procurar online ou descarregar pdf Operação e programação rápidas para Fechaduras Digilock ADA User Key. Digilock ADA User Key 3 páginas. Blue; shared usage locks standard & high security
Imprimir página
Quick
Operating & Programming
Digilock Shared Usage Locks
Standard & High Security
Digilock Accessory Guide
Programming Key (Solid Red)
• Registers Manager Override Keys to locks.
• Provides external power in case of battery failure.
• Each lock accepts only (1) programming key.
Manager Bypass Key (Solid Black)
• Provides management access to locks.
• Provides external power in case of battery failure.
• Each lock accepts up to (25) manager bypass keys.
ADA User Key (Solid Blue)
• ADA compliant user key.
www.spaequip.net
• Allows user to lock and unlock any available lock.
To initialize new locks: (Step 1)
NOTE: New locks will operate only with c K until initialized.
Step one will initialize one lock and register the manager bypass keys
to one lock.
** If you have more than one lock you will complete steps one and two
on one lock and step three on the remaining locks in your facility.
1) Touch the programming key (red) to the key slot for one full
second.
The LED will turn on.
2) Touch each manager bypass key (black) to the key slot, one at a
time.
A single blink of the led and a single beep after touching each
manager bypass key is an indicator that the manager bypass key
to be registered has been properly touched to the lock.
3) Touch the programming key (red) to the key slot for one full
second.
A double tone signifies successful initialization of your lock .
To initialize new locks: (Step 2)
Step two will copy the registration of the manager bypass keys to the
programming key.
This step is to initialize or program more than one lock.
1) Go to the lock you initialized in step 1.
2) Press: c K 6 6 K
3) Touch the programming key (red) to the key slot for one full
second.
A double tone signifies that the registered manager bypass
keys were successfully copied to the programming key.
p: 707.737.1100
To initialize new locks: (Step 3)
Product Code: DL01KUSR104
Step three will paste the information that was copied to the program-
ming key in step two to all locks at your facility.
(This step is only required if you have more than one lock).
1) Go to any lock that requires programming.
2) Touch the programming key (red) to the key slot.
A double tone signifies that the lock was successfully initial-
ized and the manager bypass keys were successfully registered
to the lock.
3) Repeat this procedure to all locks in your facility.
It is recommended to test the registration of the manager bypass keys
to the lock(s). To do this operate the lock(s) with the manager bypass
key(s) by following the operating instructions "To Operate with Man-
ager Bypass Key."
To Add Additional Manager Bypass Keys :
This step will add additional manager bypass keys to one lock and
does not erase any previously registered manager bypass keys.
1) Go to one lock.
2) Press: c K 5 5 K
The LED will flash.
3) Touch the programming key (red) to the key slot for one full
second.
The LED is solid.
4) Touch each manager bypass key (black) to the key slot, one at a
time.
A single blink of the led and a single beep after touching each
manager bypass key is an indicator that the manager bypass key
to be registered has been properly touched to the lock.
5) Touch the programming key (red) to the key slot for one full
second.
A double tone signifies successful Addition of manager keys.
If you need to add these manager keys to additional locks:
1) Follow instructions " To initialize new locks: (step 2)."
2) Follow instructions "To initialize new locks: (step 3)."
Page 2 of 3