Digimerge DPB14TLX Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Câmara de segurança Digimerge DPB14TLX. Digimerge DPB14TLX 10 páginas. Ultra resolution day & night bullet camera
Imprimir página
CAMERA ADJUSTMENT
MOTION:
You can monitor activity more efficiently, because a signal is generated by the camera
whenever motion is detected. Visual notification is also available.
1. Highlight 'MOTION' in the SPECIAL setup menu
SPECIAL
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. SYNC
6. LANGUAGE
7. DEFECT
2. Press left/right buttons to change setting to OFF/ON
9. RETURN
3. Press ENTER to access the submenu for ON setting
MOTION
AREA SELECT AREA�
AREA DISPLAY ON
SENSITIVITY
-------|- ��
MOTION VIEW OFF
RETURN
RET
- AREA SELECT:
Select motion detection area number. AREA 1-4
With the area slected will be shown ashing on and off visually.
- AREA DISPLAY:
Turns selected motion detection area ON or OFF.
Pressing ENTER when ON will change display to set
the position and the size of the area. Pressing the dirction buttons
will change the setting, and press ENTER to accept.
After you have set both position,size you can RET or AGAIN
- SENSITIVITY:
Adjust sensitivity for selected motion detection area (0-40).
- MOTION VIEW:
Turn motion detection view ON or OFF. When turned on,
upon detection of motion, motion is shown as green dots
to indicate area in which motion is taking place.
Notes
• Motion detection is normally part of a DVR which would provide more exible customization options.
-16-
OFF
OFF
OFF
INT
ENG
RET
POSITION
MOTION
CAMERA ADJUSTMENT
PRIVACY:
Hide an area so that it is not displayed on the monitor.
SYNC:
With 24V AC power source, select INT / EXT for Sync, use left/right to select.
LANGUAGE:
The OSD supports English ,Korean,Japanese, Chinese, Simplified Chinese,Russian
DEFECT:
For Service use only!
ADJUST
ADJUST:
SHARPNESS: Image edge sharpness 0 (soft image)
to 31 oversharp (default is 12)
MONITOR: CRT/LCD/USER setting for monitor type
Note: For direct monitor connection only.
(default is CRT)
OSD COLOR: 0-15 color for OSD menu text
(default is 3)
RESET
RESET:
This will reset all settings for all menus to manufacturer
defaults. This allow you to return to shipped
settings from the manufacturer.
-17-
ADJUST
SHARPNESS
-|------- ��
MONITOR
CRT
OSD COLOR
�
RETURN
RET
RESET
FACTORY
RESET
RETURN
RET