Cressi 30628 Manual de instruções de utilização - Página 12
Procurar online ou descarregar pdf Manual de instruções de utilização para Instrumento de mergulho Cressi 30628. Cressi 30628 19 páginas. B.c. 's jackets
Imprimir página
IN
A
B
C
CONTROL UNIT FUNCTIONS:
As laid out above, the control unit allows you to control a wide range of
functions. They are as follows:
1 - Inflation using button A (fig. 51). Press the button to let in air.
2 - Inflation by mouth: Place your mouth over mouthpiece B (fig. 51). Blow
in a small amount of air to eliminate any residual water from the duct.
Continue blowing while fully pressing button C. As soon as button C is
pressed, the air will start entering the bladder. To stop, release the button.
Repeat if necessary.
3 - Deflation by way of quick dump valve D, which can be operated by pulling
the corrugated hose downwards (fig. 52). The diver must be in a vertical
position.
4 - Traditional deflation: with the body in a vertical position, raise the
corrugated hose towards the surface and press button C (fig. 53).
FLAT CONTROL UNIT
The quick dump valve has a considerably smaller footprint and lower weight.
It is not equipped with a pressure relief valve (fig. 54).
C
OUT
51
D
52
53
FLAT
54
www.cressi.com
EN
27