Diginet RAPIX eHub Manual de instalação - Página 7
Procurar online ou descarregar pdf Manual de instalação para Sistemas de controlo Diginet RAPIX eHub. Diginet RAPIX eHub 16 páginas. Lighting control system
Imprimir páginaRAPIX Lighting Control System
13. Connecting RAPIX modular switches
RAPIX modular switches are wall switches for the RAPIX Lighting Control System which fit in standard
Australian wall switch grid plates. RAPIX modular switches function as eHub input peripherals.
A RAPIX modular master switch mounted in a typical Australian one-gang wall switch grid plate.
RAPIX modular switches are available as 'masters' or 'slaves'.
Master RAPIX modular switches connect directly to the eHub.
Slave RAPIX modular switches connect via master RAPIX modular switches
RAPIX modular switches are configured in RAPIX software to perform a wide range of functions and each modular
switch (both masters and slaves) includes two software configurable LED indicator colours, white and amber.
13.1. Features
•
Two configurable LED colours, white and amber
•
Fits standard Australian wall plate apertures
•
Master RAPIX modular switches connect to the eHub and are powered via the eHub
•
Slave RAPIX modular switches connect to a master and are powered via the master
•
Typical functions include
•
Toggle on / off
•
Fade lights up or down
•
Start or cancel a timer
•
Recall a fixed level
•
Toggle between off and the current Level
•
Issue a scene
All commissioning is carried on via Diginet RAPIX software suite. The configuration is downloaded to the eHub via
a DALI line.
Do not connect RAPIX modular switches to the building/house ac mains supply.
RAPIX modular switches are control devices which are powered by the eHub via an SELV
connection and must only be connected as described in this guide. That is, master switches are
connected to the eHub, slave switches are connected to master switches.
RAPIX Lighting Control System - eHub
7