Cisco 1503 Manual do software - Página 5

Procurar online ou descarregar pdf Manual do software para Interruptor Cisco 1503. Cisco 1503 49 páginas. Cisco systems switch user manual

The

characters. Spaces are not allowed. The first character cannot be a number. Passwords are

case sensitive.

An example of a valid password is

Forgot Your Password?

If you forget the password that provides access to administrator-level commands or if you

forget the password required for Telnet sessions, you can bypass the password requirement

and set a new password. You must be connected to the hub through the CONSOLE port to

perform these steps.

Take the following steps:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

field can contain from 0 to 80 uppercase and lowercase alphanumeric

Turn the hub OFF, and wait 60 seconds before going to Step 2.

Turn the hub ON, and wait while the following messages are displayed on the

terminal:

Starting the system...

Boot option : bootp get ip

Enter BOOTP phase, wait or press Ctrl-C to break...

.....

Bootup Error: Timeout, no response from BOOTP server.

Press RETURN to start a new session

Press Ctrl-C.

When the following prompt appears, enter a new administrator password:

New administrator password: <new_password>

When the following prompt appears, re-enter the new password:

Confirm administrator password: <new_password>

You are then prompted to enter and confirm a new Telnet session password, as

follows:

New telnet-session password: <new_telnet-session_password>

Confirm telnet-session password: <new_telnet-session_password>

mypassword1

Forgot Your Password?

Using Your Hub Software 3-5