Cisco 1538 series Manual de início rápido - Página 5
Procurar online ou descarregar pdf Manual de início rápido para Interruptor Cisco 1538 series. Cisco 1538 series 8 páginas. Micro hub 10/100 cabling and start up
Também para Cisco 1538 series: Manual de instalação (13 páginas)
Imprimir página
Connect the Hub to Other Network Devices
(continued)
Power outlet
rollover console cable
Connect the Console Cable
Make sure console port settings of the
1
hub match the settings of the terminal,
PC, or laptop. The default settings of
the hub console port are 9600 baud,
8 data bits, 1 stop bit, no parity, and
no flow control.
Connect the rollover console cable to
2
the CONSOLE port on the hub.
Connect the other end of the rollover
3
cable to your terminal, PC, or laptop
(if necessary, use an appropriate
adapter, such as the supplied
RJ-45-to-DB-9 adapter).
From your terminal, PC, or laptop, start
4
the terminal emulation program.
C is co 15
38 M
UP
1x
2x
10/1 00
3x
RAT ING
SPE ED
4x
100 -127
/200 -240
LED
0.3A /
V~
DOW N
100B aseT
0.2 50/6
X
0 Hz
10Ba seTX
ON
OFF
1
2 3 4
5 6 7
8
MDI
MDI -X
5x
6x
7x
8x
Console port
(RJ-45)
RJ-45-to-RJ-45
(supplied)
CON SOLE
RJ-45-to-DB-9
adapter (supplied)
Power Up the Hub
Connect one end of the power cord to
1
the hub and the other end to a power
source.
Wait approximately 2 minutes for the
2
hub to complete its power-on self-test
(POST).
After POST completes, the Continue
with configuration dialog? prompt
appears on the management station.
You can then follow the prompts to
assign IP information to the hub.
3