Cisco 300 Series Manual de início rápido - Página 5
Procurar online ou descarregar pdf Manual de início rápido para Interruptor Cisco 300 Series. Cisco 300 Series 17 páginas. Managed switches
Também para Cisco 300 Series: Ficha de dados (14 páginas), Manual de início rápido (18 páginas), Manual de início rápido (17 páginas)
Imprimir página
Connecting Network Devices
2
To connect the switch to the network:
Connect the Ethernet cable to the Ethernet port of a computer,
S
1
TEP
printer, network storage, or other network device.
Connect the other end of the network Ethernet cable to one of the
S
2
TEP
numbered managed switch Ethernet ports.
The Ethernet port light turns green when the connection is active.
Refer to
Managed Switch, page 12
and LEDs on each switch.
Repeat
S
3
TEP
the managed switch.
Cisco strongly recommends using Cat5 or better cable for Gigabit
N
OTE
connectivity. When you connect your network devices, do not exceed
the maximum cabling distance of 100 meters (328 feet). It can take up to
one minute for attached devices or the LAN to be operational after it is
connected. This is normal behavior.
300 Series Managed Switches
Features of the Cisco Small Business 300 Series
Step 1
and
Step 2
for details about the different ports
for each device you want to connect to
5