Accusplit 980-312 Instruções de utilização - Página 4

Procurar online ou descarregar pdf Instruções de utilização para Ver Accusplit 980-312. Accusplit 980-312 4 páginas. Accusplit stopwatch operating instructions

Imprimir página

12-13

• The time stored in the memory can be recalled even while the stopwatch

is measuring.

When the stopwatch is stopped

When the stopwatch is measuring

• To measure the lap time and split time while the stored data are being

recalled operate the buttons as follows.

Press "B" to measure new lap time and split time.

Press "A" to stop the measurement.

Press "D" to return to the measurement mode.

Notes:

1. Even if the digits are reset to "00", stored times are not erased and can be

recalled by pressing "C" unless new measurement is started.

2. If the stopwatch is left untouched with the recalled times shown, the display

will automatically return the STOPWATCH display in 1 to 20 minutes.

14-15

Notes:

1. During 1 second after the measurement has been started by pressing "A",

ﬂ ashing "180.0" is displayed. If the measurement is stopped by pressing

"A" during this period, "Err" will appear. If the measurement is not stopped

by pressing "A" after more than 18 seconds have elapsed, "Err" will

automatically appear. Therefore, note that measurable number of strokes

per minute is between 10 and 180.

2. If "B" is pressed while the measurement is stopped or "Err" is shown, the

digits will be reset "0.0". Even if the digits are not reset to "0.0" with the

measurement stopped or "Err" shown on the display, the measurement

can be started by pressing "A".

With each press of "C"

Split time and lap time are recalled

starting with the ﬁ rst ones.

The times are recalled starting with

the last ones.

Error

STOKE/FREQUENCY MEASURING

Press "D" to show the STROKE/FREQUENCY MEASURING display.

Start the measurement by pressing "A" and stop the measurement by pressing

"A" after the third stroke was made. The number of strokes per minute will be

displayed.

Start

STROKE/

FREQUENCY

MEASURING

mode

Please return

your AX602FY Registration to

the Repair Center address in the

warranty, and we will let you

know about future products.

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

See label on back of unit for details, or check

http://support.ACCUSPLIT.com

Measuring

Stop

Reset

Stop

The number

of strokes

per minute

(23.2)

Email (preferred)

User